Water Quality Analyzer

Handheld Multi-parameter Analyzer

The M310F multi-parameter analyzer can detect more than a dozen parameters including pH/EC/ISE/DO/temperature (mV/ORP/pX/resistivity/TDS/Sal./DO saturation), etc.

Get A Quote
Contact Us

M310F multi-parameter analyzer

930129b7593e42e048dc64741aaa949

Core Strengths

The emergence of customizable  detectors aims to provide users with a comprehensive and high-performance gas detection solution. This product boasts the following significant advantages:

Multi-reading feature allows auto-read, timed-read and
continuous-read.

LCD display screen, 3.5 inches

Automatic/Manual Temperature Compensation Ensures Accurate Results.

Auto-hold feature senses and locks the measurement endpoint.

7203b63abeae6e8ff3ea47dd893f836

 

Data Capacity Of Up To 500 Sets For Each Parameter (GLP-Compliant).

Auto-power off feature effectively extends the battery service life.

Reset Feature Automatically Resumes All Settings Back To Factory Default Options.

IP65 waterproof. The portable meter is suitable for fields measurements and out
door measurements.

 

Product Instruction:

The M310F multi-parameter analyzer has a variety of parameters to choose from, and the parameter unit is also optional. Support measurement modes, including direct reading mode and standard mode
Add mode, sample add mode and GRAN mode

Features:

pH:
● 1-5 points calibration with Standard Recognition.
● Selectable pH buffer groups, including NIST, DIN, GB.
● Automatic electrode diagnosis with pH slope and offset display.
● 1-3 points calibration with Standard Recognition.
● Settable parameters, including cell constant, temperature compensation
coefficient, and TDS factor.
● Temperature compensation type (none, linear, pure water).
Conductivity:
● 1-5 points calibration.
● Selectable measurement unit, including μg/L, mg/L, g/L, mmol/L, pX, ppm, etc.
● Measurement modes are supported, including Direct Reading mode, Standard
Addition mode, Sample Addition mode and GRAN mode.
● Over 10 methods are built-in, including F- , Cl- , Br- , I- , NO3 – , BF4 – , NH4 + , K+ , Na+ ,
Ca2+, Cu2+, Pb2+, Ag+ and etc., user-defined method is supported.
● Support for air-saturated water or zero oxygen calibration.
● Auto barometric pressure compensation
● Manual Salinity Factor Correction
● Selectable pressure unit, including kPa, mbar, Torr, Atm.

e6db5f7fda706d7f5d7a026a61c3348

 

Model M310F
Parameters pH/EC/ISE/DO/Temp. (mV/pX/Resistivity/TDS/Sal./DO Saturation)
pH Range -2.00 to 20.00 pH
Resolution 0.1, 0.01 pH
Accuracy ±0.01 pH
Calibration Points Up to 5
Standard Customization Yes
Standard Recognition NIST, GB, USA and DIN buffers
Slope Limit Yes
mV Range -2000.0 to 2000.0 mV
Resolution 0.1
Accuracy ±0.3 mV or ±0.1%
pX Range -2.00 to 20.00 pX
Resolution 0.1, 0.01 pX
Accuracy ±0.01 pX
Calibration Points Up to 5
ISE Range 1.000e-9 to 9.999e+9
Units mol/L, mmol/L, g/L, mg/L, μg/L
Resolution Up to 4 significant digits
Accuracy ±0.5%
Calibration Points Up to 5
Conductivity Range 0.000 μS/cm to 500 mS/cm
Resolution 0.001 μS/cm minimum,
various with range selection
Accuracy ±1.0% FS
Reference Temperature 20, 25 ºC
Calibration Points Up to 3
Standard Recognition 84μS/cm, 1413μS/cm, 12.88mS/cm
Resistivity Range 5.00 Ω·cm~20.00 MΩ·cm
Resolution 0.01 Ω·cm minimum
Accuracy ±1.0% FS
TDS Range 0.00mg/L~300g/L
Resolution 0.01 mg/L minimum, various with range selection
Accuracy ±1.0%FS
Salinity Range (0.00~8.00)%
Resolution 0.01%
Accuracy ±0.2%
Dissolved
Oxygen Concentration
Range 0.00 to 50.00 mg/L
Resolution 0.01mg/L
Accuracy ±0.1mg/L
Calibration Points Air-saturated water or zero point
Barometric Compensation Yes
Manual Salinity Factor Correction Yes
Saturation Range (0.0 to 300.0)%
Resolution 0.1%
Accuracy ±10.0%
Temperature Range -5 to 110 ºC, 23 to 230 ºF
Unit ºC, ºF
Resolution 0.1
Accuracy ±0.2ºC
Measurement Reading Mode Auto Read (Fast, Medium, Slow), Timed, Continuous
Reading Prompts Reading, Stable, Locked
Temp. Compensation ATC, MTC
Data management Data Storage 500 results each
GLP Features Yes
Inputs pH Electrode BNC(Q9)
DO with Temp. Probe 4-pin aviation connector
Conductivity with Temp. Probe 5-pin aviation connector
Outputs USB PC, printer
Display options Backlight Yes
Auto Shutdown 300, 600, 1200, 1800, 3600 sec., off
IP Rating IP65
Date and Time Yes
General Power Rechargeable Lithium battery, AC Adapter, 100-240V AC input, DC5V output
Dimensions 80×225×35 mm
Weight 400g (0.88 lb)
Dimensions (Carton) 490×410×220 mm
Weight (Gross) 5.5 kg

 

Our Service Processes

Pre-sales Consultancy

Confirmation of order

Production

Multi-Channel Shipping

After-sale Services

706fd94fff1992f5d8ebde03bed4aa1

Why choose us?

We Henan Oceanus Company is located in Henan province, a land with a long history and profound cultural heritage, has been dedicated to the research, development, production, and sales of gas detectors since its establishment. With exquisite technology and outstanding quality, we have won widespread recognition in the global market.

If you need more details of the Water quality detector, welcome to contact us:

Email: info@china-oceanus.com

Telephone: +86 0371 60998169

Whatsapp: +86 15981942832

Whatsapp: +86 13673683950

Scroll to Top