Special gas detector

OC-F08 Fixed temperature and humidity transmitter

  • Fixed temeprature Gas detector
  • humidity Gas monitor
  • Audible-visual alarm
  • Ex-proof certificate
  • Product description: OC-F08 online temperature and humidity detector is designed with 4-20mA standard analog signal and RS485 digital signal output with the high precision sensor to detect the Temperature and Humidity.
Get A Quote
Contact Us

Description:

OC-F08 fixed temparature and humidity gas detector used the original imported sensor and the ultra low power 32 bit microprocessor, so with the advantages of high precision, good repeatability, stable signal, respond quickly, etc. Possible connected with many controller system, such as PLC, DCS, computer and other, with the function of remote monitor and alarm, data logger and analysis.

Features:
4-20mA standard analog signal and RS485 digital signal output, 200~1000HZsignal output, relay output, data restore, data logger(optional);
LED screen displaying the gas concentration, gas type, unit, instrument status etc.
Independent air chamber, the sensor is not required to replace the sensor calibration, automatic identification of key parameters of the sensor;
Protection function to prevent high gas concentration attack;

Display the gas concentration in ppm, %LEL, %vol and mg/m3 is selectable;

Infrared remote controller operation;

With the 16bit ADC acquisition chip, designed with four-layer circuit board, so with high anti-interference ability;

With the Ex-proof certificate, the Ex-proof grade is Exd II CT6.

Technical Parameter:

Measuring range Temperature Humidity
-40~80℃ 0~100%RH
Precision ±0.5℃ ±2%RH
Zero drift <0.04℃/yr <0.5%RH/yr
Repeatability ±0.1℃ ±0.1%RH
Response time 5~30S ≥8S
Output signal 4-20mA、RS485
Working voltage DC(12~24)V
Working environment Temperature:-20℃~50℃
Humidity:≤95%, non-condensing
Installation type Wall-mounted
Output Signals (Standard)Three-wire system 4~20mA standard signals output, available for PLC, DCS, etc;

(Optional) Four-wire system RS485 digital signal output;

(Optional) Frequency signal 200~1000Hz output;

Two-level relay output:220VAC 0.5A, 5VDC 0.5A

Material of Body Cast aluminum
Explosion-proof Index Exd ib II C T4 Gb
Protection Grade IP65
Consumption 1.5W
Working pressure ≤200Kpa
Dimension 180 mm×140 mm×92 mm(L×W×H)
Weight About 1.5Kg
Warranty 12 months
Standards GB15322.1-2003,GB3836.1-2010,GB3836.2-2010,GB3836.4-2010

If any quesitons on the Fixed gas detector, welcome to contact us:

Scroll to Top